SAMA - Products - Stucco for large surfaces -- Technical sheet

Technical sheet for the STUCCO for LARGE SURFACES
Description:	Plaster for smoothing of large surfaces.
Main characteristics	The application of this product is made easy by its composition based on non synthetic raw materials
Directions for use:	Apply two layers, waiting one hour at ƒ18 C between them; wait 2-3 hours for complete drying, then use sandpaper number 180. Time intervals change with temperature and wall characteristics
Colour:	The normal stucco is grey in its original container, but after drying the final shade is alpine white The extra stucco is almost white in origin, after drying it is sharply white The super stucco is white in origin, after drying it is very white
Yield:	4-5 sqm/kg each layer; if watered down, up to 7-8 sqm/kg
Dilution:	Ready to use; if the wall is particularly dry, water down just a little
Tools:	Stainless steel triangular or rectangular trowel
Working temperature	Above 10 ƒC
Hints:	Apply very thin layers
Shelf life:	Unlimited in a fresh and dry room closed in its original container, even when partially used (but UNDILUTED)
Tools cleaning:	Plain water
Sandpaper:	Wait 2-3 hours Aat 18 ƒC for complete drying before using sandpaper
Advantages:	When working with porous walls it allows to save on the smoothing work applying one or two layers; easy to work with; great yield